DSB系列新品推出Proportion-Air傳感器
DSB系列新品推出Proportion-Air傳感器
由Proportion-Air DSB-Series工業壓力傳感器，Proportion-Air制造DSB-Series工業壓力傳感器。 是我們提供的標準傳感器DSB-Series。 zui初“d”的意思是“下游”來表示一個壓力傳感器,用于提供電子反饋的輸出壓力卷助推器一系列QB2 dual-loop比例控制閥。
爭端解決機構工業壓力傳感器測量的無腐蝕性的氣體壓力的電氣輸出信號正比于完整的校準范圍。例如,0 - 100 PSI校準清廉直流輸出會讀5 VDC 50 PSI。
這個工業傳感器作為獨立的傳感器或第二循環的反饋在Proportion-Air 2-loop壓力控制大會。 打給我們,我們很樂意幫助識別應用程序的*解決方案。
爭端解決機構工業壓力傳感器配置了各種連接器或飛行的線索。
Proportion-Air雙邊帶工業壓力傳感器
DSB-Series系列Industrial Pressure Transducer
壓力范圍:真空通過175 PSI(12條)
準確性:±0.2% F.S.
可重復性:±0.02% F.S.
媒體:無腐蝕性的氣體
重量:4.8盎司。(136克)
響應時間:100微秒
端口大小:1/8和1/4“不擴散條約》
耐用性:受沖擊和振動(100 Gs)
操作溫度:32 - 158°F(0 - 70°C)
輸出信號:電壓或電流 DSB系列新品推出Proportion-Air傳感器
下面我司為大家介紹一下美國Proportion-Air壓力傳感器DS系列，Proportion-Air壓力傳感器DS系列詳細介紹
DS series pressure transducers accuray measure pressure of gases or fluids.
The output is an electrical signal based on the measurement.
Conditioning of the electrical signal from the strain gauge sensor gives either 0-
10 VDC or 4-20 mA output depending on the model ordered (consult factory for
other available outputs). The electrical output is a linear ratio of the pressure
sensed. DS series transducers are enclosed in a rugged aluminum housing. A
strain relief protects the wiring from damage caused by excessive pulling force.
The standard version (DS) measures pressure using a piezo-resistive
semiconductor sensor chip.
The stainless steel version (DST) utilizes the same silicon etched device mounted
on a stainless steel diaphragm. On these units, no elastomers or o-rings contact
the pressurized media. All media wetted parts are ANSI type 316L stainless
steel.
The NEMA4 version (DSW series) is electrically identical to the DS series. The
DSW series is housed in a slightly larger canister that is sealed against fluid
spray from any direction.
The compact package (DSL) utilizes a piezo-resistive strain gauge sensor housed
in a miniature rugged anodized aluminum canister. The DSL has a 10-32
pneumatic connection is lightweight with high accuracy and repeatability.
